<ul id="6acmc"></ul>

<tfoot id="6acmc"></tfoot>

當前位置：首頁 > 技術文章 > 天康集團鎧裝熱電偶如何選型

天康集團鎧裝熱電偶如何選型

更新時間：2013-06-21 點擊次數：2156

鎧裝熱電偶規格型號：WRNK-231、 WRMK 、WREK 、WRFK 、WRCK ；分度號：K 、N、 E、 J、 T 安裝方式：無固定裝置、固定卡套螺紋、活動卡套螺紋、固定卡套法蘭、活動卡套法蘭；測溫范圍0~1300°C；安徽天康集團還可按樣品或圖紙定做各種特殊型號熱電偶、熱電阻、雙金屬溫度計及溫度傳感器安裝保護套管，以滿足各種特殊場合。安徽天康集團是中國zui大的溫度儀表生產基地。選型，.

鎧裝熱電偶特點
      熱響應時間少，減小動態誤差；
      可彎曲安裝使用；
      測量范圍大；
      機械強度高，耐壓性能好

主要技術參數
      產品執行標準
      IEC584
      IEC1515
      GB/T16839-1997
      JB/T5582-91

偶絲直徑及材料

偶絲形式		單支式	雙支式
套管直徑		Ф2Ф3 Ф4 Ф5 Ф6 Ф8	Ф3Ф4 Ф5 Ф6 Ф8
套管材質	E﹑J﹑T	1Cr18Ni9Ti	1Cr18Ni9Ti
	K﹑N	1Cr18Ni9Ti GH3030	1Cr18Ni9Ti GH3030
	S	GH3039	GH3039

Anhui Tian Kang Group Selection sheathed thermocouple

Armored Thermocouple Specification: WRNK, WRMK, WREK, WRFK, WRCK; dividing number: K, N, E, J, T Installation: no fixed installations, fixed card sets of threads, thread activity card sets, the fixed cards flanges, activity card sets flange; temperature range of 0 ~ 1300 ° C; Anhui days Tek Holdings samples or drawings can also be customized by a variety of special models thermocouple, thermal resistance, bimetallic thermometers and temperature sensors installed protection casing, in order to meet a variety of special occasions. Anhui Tian Kang Group is the largest production base of the temperature instrument, now with the Global 500 companies specializing in the production ABB Temperature and flow control instrumentation series. Selection Services .

Characteristics of sheathed thermocouple
      Response time of less heat, reducing the dynamic error;
      Flexible installation;
      Measuring range;
      High mechanical strength, good pressure resistance

Main technical parameters
      Product performance standards
      IEC584
      IEC1515
      GB/T16839-1997
      JB/T5582-91

Dual wire diameter and material
Even the form of single wire dual Supported
Casing Diameter Ф2Ф3 Ф4 Ф5 Ф6 Ф8 Ф3Ф4 Ф5 Ф6 Ф8
Casing Material E ﹑ ﹑ T 1Cr18Ni9Ti 1Cr18Ni9Ti J
K ﹑ N 1Cr18Ni9Ti GH3030 1Cr18Ni9Ti GH3030
S GH3039 GH3039

上一篇：無紙記錄儀常見問題及處理方法
下一篇：關于紅外線人體測溫儀電路的設計方法